aFe CONTROL PFADT Series Aluminum Frame Camber Kit Chevrolet Corvette Z06 (C6) 06-13
Fe Control is proud to release the PFADT Series steel frame Camber kit for the 1997-2013 Corvette C5/C6. The kit is designed to replace the factory alignment eccentrics with precision water jet cut aluminum degree indexed spacers to positively lock alignment settings in place without the risk of slippage common with factory eccentrics on track driven Corvettes. Upper control arm adjustment is achieved through the use of 304 stainless steel alignment shims. Included in the kit is grade 10.9 hardware upper control arm studs and all necessary hardware. Don't risk tearing up an expensive set of tires due to a alignment slip. Install a PFADT Series camber kit today. Please note that if you have a C6 Z06, use part # 450-401010-A
- Precision Water Jet Cut Aluminum Degree Indexed Spacers
- Incl. 304 Stainless Steel Upper Control Arm Alignment Shims
- Grade 10.9 Hardware/Bolts/Studs Included
- Replaces OEM Eccentrics Which Are Prone To Slippage
- A Must Have For Track Driven Corvettes
- Direct Fit Installation
- No Modifications Necessary
Application Summary:
| Year |
Make/Model |
| 2006-2013 |
Chevrolet Corvette |
| Attributes |
| Bolt Length |
120 |
| Bolt Thread Size |
M14 x 2 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color |
Raw |
| Country of Origin (Primary) |
US |
| Finish |
Natural |
| GTIN |
00802959000465 |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Locking Nut Included |
Yes |
| Material |
Aluminum |
| NAFTA Preference Criterion Code |
B |
| SDR Required Flag |
N |
| Warranty Time |
2 |
